Converged Network Adapter (10Gbps); Installing The 10G Base-Sr Sfp+ Module; Removing The 10G Base-Sr Sfp+ Module - Cisco C880 M4 Service Manual
Hide thumbs
Also See for C880 M4:
- Configuration manual (146 pages) ,
- Operating manual (58 pages) ,
- Service supplement manual (27 pages)
Table of Contents
Advertisement
APP0313000
C.13 Converged Network Adapter (10Gbps)
APP0313010
C.13.1 Installing the 10G BASE-SR SFP+ module
(1) Installing the SFP+ module
See "Figure C.13.1".
1. Grasp the module, and work it toward and into the rear of the card.
2. To connect a cable, remove the dust cap.
APP0313020
C.13.2 Removing the 10G BASE-SR SFP+ module
(1) Removing the SFP+ module
See "Figure C.13.2".
1. Operate the lever to open it.
2. Hold the lever and pull it out.
Figure G.13.1
Figure C.13.2
117
CA92344-0577-01
Advertisement
Table of Contents
