APP0315020
C.15.2 Installing the SAS Array Controller Card only into Slot#1
(1) Confirm the jumper setting of BP Board#0 and #1. See Figure C.15.2-1.
(2) Install the SAS array controller card into Slot#1 and secure it with the screws. See Figure C.15.2-2.
(3) Connect FBU cable and TFM module if flash backup unit is used.
See Appendix C.14.3, "FBU Cable Connection (APP0314030)".
Figure C.15.2-1
Figure C.15.2-2
125
CA92344-0577-01