Installing The Sas Array Controller Card Into Both Slot#0 And Slot#1 - Cisco C880 M4 Service Manual
Hide thumbs
Also See for C880 M4:
- Configuration manual (146 pages) ,
- Operating manual (58 pages) ,
- Service supplement manual (27 pages)
Table of Contents
Advertisement
APP0315030
C.15.3 Installing the SAS Array Controller Card into both Slot#0 and
Slot#1
(1) Confirm the jumper setting of BP Board#0 and #1. See Figure C.15.3-1.
(2) Install the SAS array controller card into Slot#0 and Slot#1, and secure it with the screws. See
Figure C.15.3-2.
(3) Connect FBU cable and TFM module if flash backup unit is used.
See Appendix C.14.3, "FBU Cable Connection (APP0314030)".
Figure C.15.3-1
Figure C.15.3-2
127
CA92344-0577-01
Advertisement
Table of Contents
