Honeywell TUXWIFIS Installation And Setup Manual page 6

Feature Description
IMPORTANT
DO NOT perform panel programming while in the Safe Mode. Performing panel
•
programming while in Safe Mode may cause the panel and keypad to become out of sync.
DO NOT use more than several hardwired motion detectors in high traffic locations. The
•
high quantity of signals received by the panel may cause the keypad to enter the Safe Mode.
The actual number of installed detectors depends on the amount of traffic and the number of
detectors being used. High traffic can cause Safe Mode with as few as three detectors.
The Screen Blackout (EN50131) feature prevents unauthorized users from viewing
Screen
the status of the Security System by returning to the Home screen and turning off
Blackout
the Armed and Ready status LEDs.
When the EN50131 Display is turned ON:
• Tuxedo returns to the "Home" screen after 30 seconds; "Armed" and "Ready"
LEDs turn OFF.
• The "To Homepage After" time setting changes to 30 seconds and the time is
non-selectable.
• The "Auto Slideshow After" is preset to "1" minute and cannot be changed.
• The Security, Message and Lighting screen does not display system status
until an authorized user code is entered.
• The "Setup" menu does not display system status until an authorized user code
is entered.
Videos cannot be played.
•
Night Setup The NIGHT function can beset to arm the system in one of five arming modes. Refer
to the "Night Setup" section for details.
• Web server hosting is not Listed for use in UL installations.
U L
Remote Arming/Disarming/Programming is not to be used in UL Listed installations.
•
Wi-Fi has not been evaluated by UL.
•
About the System (cont'd)
6