Security; Screen Security; Code Authority - Honeywell TUXWIFIS Installation And Setup Manual

Screen Security

The Screen Security icon displays a list of authority levels and the user level that has been given
access to them. To view and/or edit Screen Security, do the following:
From the "Home" screen, press the Setup
Press the CS Setup
- If authority levels are correct, press BACK or Home to exit the menu.
- If changes are necessary, select the line to be changed and the level of user to have access; then
press Apply
.
NOTES:
1. The Screen Security screen contains a heading of Advanced Setup, Central Station Setup, Disp. &
Audio Setup, Event Logs, Lighting, Message, Security, or Time/Date highlighting the line that was
selected for change. The Screen Security screen is re-displayed listing any changes.
2. The User Levels listed on this screen match the User Levels in commercial panels. See the following
chart for corresponding User Levels in Residential Panels.
Residential Panels and Screen Security
Authority Level in
Panel
System Master
Partition Master
Standard User
Arm Only
Guest
Duress

Code Authority

The Code Authority screen displays User Names and Partition Authority Level for the User Code. To
view the Code Authority level, do the following:
From the "Home" screen, press the Setup
Press the CS Setup
digit User Code for the user that you want to obtain Authority Level information about. Press BACK.
NOTE: If the User Code entered is not active in the system, an "INVALID" message will be displayed.

Security

icon and then the System setup
and enter your authorized code. Press the Screen Security
Matching
Authority
Level in
Keypad
Master No
Master No
Normal No
N/A No
Guest No
N/A No
icon and then the System setup
and enter your authorized code. Press the Code Authority
Access Level Chosen in Keypad Screen Security
Yes Yes Yes
Yes Yes Yes
No No Yes
No No No
No No No
No No No
29
icon.
icon.
Yes Yes
Yes Yes
Yes Yes
No No
Yes Yes
No No
icon.
icon. Enter the 4-