Add A User; Night Setup Function - Honeywell TUXWIFIS Installation And Setup Manual

NOTE: The authorized code for deleting, adding, and editing users is dependent upon the alarm panel
you are interfacing with. Check your alarm panel Installation and Setup Guide to determine
who can delete, add, and edit users.

Add a User

From the "Home" screen, press the Setup
Press the USER SETUP
next to Enter User Name and type in the user name (max. 6 characters; no spaces between characters);
press the OK icon.
Press the box next to User Number and enter an "available" (3-digit) user number; press the OK icon.
Press the box next to Enter User Code, enter the 4-digit User Code for this user and press the OK icon.
Press the box next to RF Button Zone (if used); enter the 3-digit RF Button Zone for this user.
Press the Save icon.
NOTES:
• For available user numbers, refer to the control panel instructions.
• If assigning this user to wireless key, enter one of the zone numbers of the keyfob (the wireless key
must be programmed first before it can be assigned to a user).
How to Add an Existing User to a Second Tuxedo
After adding a user to the first Tuxedo, the same user can be added to a second Tuxedo. From the
second Tuxedo go to "User Setup" and enter the same user name and same user code (refer to "How to
Add a User" above). The second Tuxedo will automatically update the user information. Press Save.
Delete a User
Select the User you want to delete and press the DELETE USER
and press the appropriate icon.
Edit a User
NOTE: You cannot edit a User name or User number. To modify a User name or User number, you
must delete the User and re-enter the User. Edit a User as follows:
Press the EDIT USER
and press Save.

NIGHT Setup Function

The NIGHT function can be set to arm the system in one of five arming modes:
• Away - Arms all zones with entry delay.
• Stay - Arms perimeter zones with entry delay.
• Instant - Arms perimeter zones without entry delay.
• Night (Residential Panels Only) – Arms all perimeter zones plus all zones listed in Zone List 5.
• Maximum - Arms all zones without entry delay. Not to be used for ANSI/SIA CP-01 installations.
Security (cont'd)
icon and then the System setup
and ADD USER
icon and enter your authorized code. Select the options needed for this user
icons, then enter your authorized code. Press the box
icon. Enter your authorized code,
31
icon.