Indicator Leds - NETGEAR Trek PR2000 Quick Start Manual

Indicator LEDs

Monitor the status of your Trek using the following LEDs:
•
Power LED
•
Internet LED •
•
•
WiFi LED •
•
•
USB LED
•
Green. The Trek is powered on.
Off. The Trek is powered off.
Green. The Trek is connected to the Internet.
Blinking green. One of the following occurred:
• The Reset button was pressed longer than five
seconds.
• A firmware upgrade is in progress.
• The bandwidth limit was exceeded.
Off. The Trek is not connected to the Internet.
Green. The WiFi radio is operating.
Off. The WiFi radio is off.
Green. A USB device is connected and ready.
Off. No USB device is connected.
5