Meet Your Netgear Trek; Internet Mode Switch - NETGEAR Trek PR2000 Quick Start Manual

Meet Your NETGEAR Trek

Before you install your Trek, familiarize yourself with its LEDs, buttons, and
port.

Internet Mode Switch

Put the Internet Mode switch in one of the following positions:
• Wired. Set the switch to Wired if you want to connect the Trek to the
Internet with an Ethernet cable. For example, set the switch to Wired
if you want to use the Trek in router mode or AP mode.
• Power off. Set the switch to Power off to turn off the Trek. Make
sure the switch is set to Power off before plugging the Trek into an
electrical outlet.
• Wireless. Set the switch to Wireless to connect the Trek to the
Internet with a WiFi connection. For example, set the switch to
Wireless if you want to use the Trek in hotspot mode, extender mode,
or bridge mode.
3