Indicator Leds - NETGEAR Trek PR2000 Instalaltion Manual

Indicator LEDs

Monitor the status of your Trek using the following LEDs:
Cover
(rotate
clockwise
to open)
Indicator LEDs
Power • Green. The Trek is powered on.
• Off. The Trek is powered off.
Internet • Green. Either the Internet/LAN port is
connected physically or a wireless
channel is associated successfully.
• Blinking green. One of the following
occurred:
- The Reset button was pressed longer
than five seconds.
- A firmware upgrade is in progress.
- The bandwidth limit was exceeded.
• Off. The Trek is not connected in either
wired or wireless mode.
WiFi • Green. Either the LAN port or a wireless
device is connected to the Trek.
• Off. No device is connected.
USB • Green. The USB drive is properly
mounted.
• Off. No USB drive is detected.
6