3. Set the Internet Mode switch to Wired.
4. Connect your computer or WiFi device to the Trek.
You can use an Ethernet cable or connect with WiFi:
• For a wired connection, use an Ethernet cable (not included) to
connect your computer to the LAN port on the Trek.
• To connect with WiFi, use the Trek's network name (SSID) and
WiFi password, which are on the sticker near the Internet Mode
switch. For more information, see
with WiFi
5. Launch a web browser.
6. Enter www.routerlogin.net in the address field of the browser.
NETGEAR genie displays.
7. If a login screen displays, do the following:
Enter admin for your user name and password for your
a.
password.
The BASIC Home screen displays.
b.
Select ADVANCED > Setup Wizard.
The Setup Wizard screen displays.
8. Follow the onscreen instructions.
NETGEAR genie guides you through connecting the Trek to the
Internet.
.
on page 16
Connect Devices to Your Trek
15