Back Panel With Ports, Port Leds, And System Leds - NETGEAR PR60X Hardware Installation Manual

10G/Multi-Gigabit Dual WAN Pro Router Model PR60X
Back panel with ports, port LEDs, and system
LEDs
The following figure shows the back panel of the router.
Figure 2. Back panel
From left to right, the back panel contains the following components:
• System LEDs: The same system LEDs that are on the front panel (see Front panel
with system LEDs on page 11).
• Reset button: Recessed dual-function Reset button (see Dual-function Reset button
on page 13).
• LAN4 port: One independent 1G/10G SPF+ fiber LAN port (LAN4, see Fiber
transceiver modules and cables for the SFP+ port on page 14) for connection to a
high-speed LAN device such a high-speed switch. For information about the LED,
see the SFP+ LED (see Front panel with system LEDs on page 11).
• LAN5 WAN2 port: One dual-function 1G/2.5G/5G/10G multi-gigabit RJ-45 port
(see RJ-45 ports for multi-gigabit connectivity on page 14) that you can configure
as a LAN port (LAN5) or a second WAN port (WAN2). For information about the two
port LEDs, see the table below.
By default, the port functions as a LAN port. For information about how to change
the function to a second WAN port, see the user manual, which you can download
by visiting netgear.com/support/download/.
• WAN1 port: One independent 1G/2.5G RJ-45 WAN (Internet) port (see RJ-45 ports
for multi-gigabit connectivity on page 14) for connection to a cable or DSL modem.
This port is the primary WAN port (WAN1) and has a yellow label. For information
about the two port LEDs, see the table below.
• LAN1, LAN2, and LAN3 ports: Three independent 1G/2.5G RJ-45 LAN ports (LAN1,
LAN2, and LAN3, see RJ-45 ports for multi-gigabit connectivity on page 14) for
connections to devices such as a switch, access point, NAS, and other devices. For
information about the two port LEDs for each port, see the table below.
• Power receptacle: AC power receptacle to be used with the power adapter that is
provided with the router. The AC input is rated at 100–240V ~ 50/60 Hz, 1.3 A.
• Slot: Security slot for an optional Kensington security cable lock.
Hardware Overview 12 Hardware Installation Guide