Pppoe Settings (Cisco Spa 525G/525G2 Only) - Cisco SPA 525G2 Administration Manual

Cisco SPA IP Phone Field Reference
System Tab
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide
Parameter
Static IP
Netmask
Gateway
LAN MTU
Ethernet MTU (Cisco SPA
525G//525G2 SPCP only)
Duplex Mode

PPPoE Settings (Cisco SPA 525G/525G2 Only)

Parameter
PPPoE Login Name
PPPoE Login Password
PPPoE Service Name
Description
If static IP was chosen as the type of internet
connection, displays the static IP address assigned to
the phone.
If static IP was chosen as the type
Default router IP address. Blank if DHCP assigned.
LAN Maximum Transmission Unit size. Default value:
1500.
Ethernet Maximum Transmission Unit size. Default
value: 1500.
Duplex Mode—Choose one of the following to
configure the speed/duplex for the phone's Ethernet
ports:
•
Auto
•
10MBps/Duplex
•
10MBps/Half
•
100Mbps/Duplex
•
100MBps/Half
Description
Specifies the account name assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
Specifies the password assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
Specifies the service name assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
B
214