Breville the Kitchen Wizz Quad BFP650 Instruction Booklet page 13

ASSEMBLING yOUR BREvILLE PROdUCT
4. Place the processing lid onto the
processing bowl so the food chute
is slightly right of the bowl handle.
Holding the handle of the bowl and
the food chute at the same time, turn
the lid clockwise to align it with the
LOCK symbol on the bowl handle. The
LOCKING TAB on the lid will slot into
the INTERLOCKING SAFETy CATCH
on the handle. The lid should be now
securely locked into position.
NOTE
The food processor will not operate
unless both the processing bowl and
lid are correctly locked into position.
NOTE
Your Breville food processor is
equipped with a silicon seal, located
in a recess around the outer rim of
the food processor bowl lid, to reduce
leakage while processing larger
volumes of wet ingredients. The
silicon seal is removable for cleaning
purposes (refer to Cleaning and Care).
12
5. Insert the power plug into a 230/240
volt power outlet and switch the power
outlet on.
The red power light illuminates. your
food processor has ON, OFF and PULSE
buttons to give total control when
processing food. Press the ON button
to switch the motor on and operate
continuously. Press the OFF button to
switch the motor off. When short bursts
of power are required, press the PULSE
button and hold down briefly, release,
then press again. The PULSE action will
automatically stop when the button
is released.
6. After processing, always wait until the
blades or discs have stopped spinning
before unlocking and removing the lid.
To remove the processing lid, ensure the
OFF button has been pressed, the power
is switched off at the power outlet and
the cord is unplugged from the power
outlet. Holding the handle of the bowl
and the food chute at the same time,
turn the lid anti-clockwise (as indicated
by the symbol) and lift off.
NOTE
As a safety feature, the food processor
will automatically switch off when the
lid is unlocked, however, it is good
practice to manually switch off the
food processor using the OFF button
before removing the lid.
7. Remove the processing bowl (before
removing blade or discs) by turning it
anti-clockwise until the handle is in line
with the UNLOCK symbol. Lift the bowl
off the attachment spindle.
WARNING
The Quad ‰ processing blade and discs
are extremely sharp, handle with care
at all times.