Honeywell bendis king KLN 94 Maintenance Manual page 50

BENDIX/KING
A. Set the Gillham Altitude switches according to the table below. Verify that the alti-
tude is the same as indicated in the table.
SWITCH S19
INPUT A1
SWITCH L
SETTING
SWITCH O
SETTING
B, Press the CRSR button on the KLN 94.
C. Turn the right outer knob until the cursor is over the word "OK".
D. Press the ENT button.
E. Turn the right inner knob until the unit shows the following display.
F. Set the following switches to the settings listed in the table below.
G. Verify the unit displays the following page.
Rev 0, Sept/2000
Baro must be set to 29.92".
S20 S21 S22
A2 A4 B1
O L O
L O L
GPSDSP-L
SPARE0 -L
TST 7
SWITCH
S28 GPS DISPLAYED
S11 SPARE IN 1
S12 SPARE IN 2
S13 SPARE IN 3
S15 SPARE IN 0
S16 APPROACH ARM IN
S10 TAKE HOME
GPSDSP-L
SPARE0-L SP2-L
TST 7
15599M00.JA
NOTE:
S23 S24 S25
B2 B4 C1
L O L
O L O
SP1-0
SP2-0
RTI TAKEHOME-0
SP1-L
RTI TAKEHOME-0
S26 S27 S18 GILLHAM
ALTITUDE
C2 C4 D4
O O O 24,300 Ft.
±10 Ft.
L L L 49,900 Ft.
±10 Ft.
SP3-0
APRCHARM-0
TAKEHOME-0
SETTING
GROUND
LOW
LOW
LOW
OBS
LOW
LOW
SP3-L
APRCHARM-L
TAKEHOME-L
Page 5-11
KLN 94