Central Station Communication; Pager Communication - GE CareGard Installation Instructions Manual

Phone Communication Testing

Central Station Communication

¾
To perform a Central Station Communication Test:
1. Contact the central monitoring station and inform the operator that you are testing the system.
Also, inform the homeowner of all system pagers or voice event notification phones.
2. Test each sensor.
3. After you have completed the test, contact the central monitoring station to verify each alarm
was received.
• Refer to Table 8 for a complete list of Reporting Codes.

Pager Communication

¾
To perform a Pager Communication Test:
1. Contact the central monitoring station and inform the operator that you are testing the system.
Also, inform the homeowner of all system pagers or voice event notification phones.
2. Set the pager to ON.
3. Test each sensor.
• Refer to Table 8 for a complete list of Reporting Codes.
Event
Auto Phone Test
Manual Phone Test
RF Sensor Failure:
Smoke
Panic
PIR
Repeater
CO
Activity
Water
Emergency
Freeze
Call Button
AC Failure
AC Restore
Enter Programming
Exit Programming
Water Sensor
CO Detector
Activity Timer Failure
Medication Failure
Alarm Cancel
Smoke Detector
Audio Listen (Instant)
Audio Listen (Call Back)
Emergency Sensor (RF)
Table 8: Reporting Codes
SIA Code CID Code
RP 1602
RX 1601
FS 1381
MS 1381
US 1381
QS 1381
GS 1381
US 1381
WS 1381
MS 1381
ZS 1381
MA 1100
AT 1301
AR 3301
LB 1627
LX 1628
WA 1154
GA 1151
NA 1102
MS 1641
OC 1406
FA 1110
L90 1606
X Audio 1411
MA 1100
Pager Code
N/A
-101-101
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
-107-107
-103-103
-102-102
-122-122
-122-122
-121-121
-119-119
-105-105
-104-104
-123-123
-109-109
N/A
N/A
-107-107
26