Appendix; Interrogator 200 Avm Wiring Instructions; Accessing The Panel Circuit Board - GE CareGard Installation Instructions Manual

Appendix

Appendix
Interrogator 200 AVM* Wiring Instructions
* Not investigated for use by ETL.

Accessing the Panel Circuit Board

1. On the panel's back, remove the four (4) panel screws as shown in Figure 7. Next, remove the
back plate from the chassis and set it to the side.
2. On the panel circuit board, locate the Panel Speaker Connector (see Figure 8) and remove it
from the board. Next, locate the 8-Pin Panel Cable Connector and plug the AVM Micro-
phone Connector to it.
Panel Speaker
Connector
Figure 8. Locating Panel Speaker and 8-Pin Cable Connectors
3. Insert the two prongs on the AVM Speaker Connector (blue wires) into the female plug on
the Panel Speaker Connector (see Figure 9).
AVM Speaker
Connector
Figure 9. Connecting AVM Speaker and Panel Speaker
Panel Screws
Panel Screws
Figure 7. Locating the Panel Screws
8-Pin Panel Cable
Connector
Panel Speaker
Connector
32