Option 11: Phone Mod 2; Option 12: Pager/Voice Event Notification - Phone Mod 3 - GE CareGard Installation Instructions Manual

Option 11: Phone Mod 2

The Phone Mod 2 option determines the content and format the panel
reports through the Secondary Phone Number (Option 4). When deleted, the
option is set to OFF. See Table 3 for a complete list of Phone Mod 2 settings.
Note
Each entry must contain two digits.

Option 12: Pager/Voice Event Notification - Phone Mod 3

Option 12 determines the content and format the panel reports through the
Pager/Voice Event Notification (Option 5). When deleted, the option is set to
OFF. Refer to Table 4 for a complete list of Phone Mod 3 settings.
Note
Each entry must contain two digits.
Programming Options
Table 3: Phone Mod 2 Settings
Setting
00 All
01 All
02 Alarms Only
03 Alarms Only
04 Non-Alarms Only
05 Non-Alarms Only
06 Phone 1 and Phone 3 backup (reports the
same as Phone 1 if the system cannot
connect to Phone 1 or Phone 3 numbers)
07 Phone 1 and Phone 3 backup (reports the
same as Phone 1 if the system cannot
connect to Phone 1 or Phone 3 numbers)
08 AC Power Restoral/Failure, Medication
Reminder, Activity Timer, and Phone Test
09 Same as Setting 08, includes Alarms
10 Alarms only.
Table 4: Phone Mod 3 Settings
Setting
08 AC Power Restoral/Failure, Medication Reminder,
Activity Timer and Phone Test
09 Same as Setting 08, includes Alarms
10 Alarms Only
¾
To program Phone Mod 2:
1. Press Add.
2. Press Option #.
3. Press 1, then 1 again.
4. Enter the Phone Mod 2 setting.
5. Press Done.
Content
¾
To program Phone Mod 3:
1. Press Add.
2. Press Option #.
3. Press 1, then 2.
4. Enter the Phone Mod 3 setting.
5. Press Done.
Content
Range = 00-10, Off (Default = 00)
Format
SIA
Contact ID
SIA
Contact ID
SIA
Contact ID
SIA
Contact ID
Pager
Pager
Voice Event
Notification
Range = 08-10, Off (Default = 10)
Format
Pager
Pager
Voice Event
Notification
12