Chapter 4 Handset, Headset, And Speakerphone; Handset; Press (A Speed Dial Button) - Cisco 7975G Software Manual

Handset, Headset, and Speakerphone
You can use your phone with these audio devices: a handset, headset, or speakerphone.
The phone is off-hook when the handset is lifted or another audio device is in use.
The phone is on-hook when the handset is in its cradle and other audio devices are not in use.
This chapter contains the following topics:
•
•
•
•

Handset

The following table describes how to use the handset.
If you want to...
Use the handset
Switch to the speakerphone or
headset during a call
Adjust the volume level for a call
Handset, page 61
Headset, page 62
Speakerphone, page 63
AutoAnswer with Headset or Speakerphone, page 63
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G User Guide for Cisco Unified Communications
C H A P T E R
Then...
Lift it to go off-hook; replace it in the cradle to go on-hook.
The ringing line is selected automatically. Contact your system
administrator for the options to select the primary line each time.
Press or , then hang up the handset.
Press during a call or after invoking a dial tone.
Press Save to preserve the volume level for future calls.
4
Manager 9.0 (SCCP and SIP)
61