Cisco 7975G Software Manual page 20

Buttons and Hardware Identification
Table 1: Phone Buttons and Hardware
Item
1
Programmable buttons
2 Footstand button
3
Display button
4
Messages button
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G User Guide for Cisco Unified Communications
Manager 9.0 (SCCP and SIP)
4
Description
Depending on configuration, programmable buttons provide access to:
• Phone lines (line buttons) and intercom lines
• Speed-dial numbers (speed-dial buttons), including the Busy Lamp Field
(BLF) speed-dial feature
• Web-based services (for example, a Personal Address Book button)
• Call features (for example, a Privacy, Hold, or Transfer button)
Buttons illuminate to indicate status:
•
Green, steady: Active call or two-way intercom call
•
Green, flashing: Held call
•
Amber, steady: Privacy in use, one-way intercom call, Do Not Disturb
(DND) active, or logged into Hunt Group
•
Amber, flashing: Incoming call or reverting call
•
Red, steady: Remote line in use (shared line, BLF status or active Mobile
Connect call)
Enables you to adjust the angle of the phone base.
Cisco Unified IP Phones 7970G, 7971G-GE, and 7975G
• Awakens the phone screen from sleep mode or disables the touchscreen
feature for cleaning.
•
No color: Ready for input
•
Green flashing: Disabled
•
Green steady: Sleep mode
Cisco Unified IP Phones 7945G and 7965G
• Awakens the phone screen from sleep mode.
•
No color: Ready for input
•
Green steady: Sleep mode
Autodials your voice message service (varies by service).
Phone Features