Voice Messages; Voice Messages Access - Cisco 7975G Software Manual

Voice Messages

This chapter contains the following topic:
•

Voice Messages Access

To access voice messages, press the Messages button
Your company determines the voice message service that your phone uses. For the most accurate and detailed
information about your service, refer to the documentation that came with it.
• When you have a voice message, look for:
• When you have a voice message, listen for:
• To send a call to a voice message system, press iDivert.
Related Topics
Rings and Message Indicator Customization, on page 65
Voice Messages Access, page 81
◦ A steady red light on your handset. (This indicator can vary.)
◦ A flashing message waiting icon
The red light and message waiting icon display only when you have a voice message
Note
on your primary line, even if you receive voice messages on other lines.
◦ A stutter tone from your handset, headset, or speakerphone when you place a call.
The stutter tone is line-specific. You hear it only when using the line with the waiting messages.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G User Guide for Cisco Unified Communications
C H A P T E R
.
and text message on your phone screen.
Manager 9.0 (SCCP and SIP)
7
81