Footstand Adjustment; Taps Registration - Cisco 7975G Software Manual

Phone Installation
Procedure
Step 1
Remove the handset from the cradle and pull the plastic tab from the handset rest.
Step 2 Rotate the tab 180 degrees.
Step 3 Hold the tab between two fingers, with the corner notches facing you.
Step 4 Line up the tab with the slot in the cradle and press the tab evenly into the slot. An extension protrudes from
the top of the rotated tab.
Step 5 Return the handset to the handset rest.

Footstand Adjustment

To change the angle of the phone base, adjust the footstand while pressing the footstand button.

TAPS Registration

TAPS might be used either for a new phone or to replace an existing phone. To register with TAPS, pick up
the handset, enter the TAPS extension provided by your system administrator, and follow the voice prompts.
You might need to enter your entire extension, including the area code. After your phone displays a confirmation
message, hang up. The phone restarts.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G User Guide for Cisco Unified Communications
Footstand Adjustment
Manager 9.0 (SCCP and SIP)
15