Gsm Status Displays; System Status Displays - Honeywell AlarmNet 7845GSM Installation And Setup Manual

7845GSM/7845GSMCN Installation and Setup Guide

GSM Status Displays

[E]
[S]
5-2
WWW.DIYALARMFORUM.COM
PriRSSI GPRS REG
-xxxdbm x x
Cntry Netw LAC
xxx xxx xxxxx
Cell BaseSt Chan
xxxxx x xxx
Second Site RSSI
-xxxdbm

System Status Displays

ECP 67 TmPB Flt
xx 5 ++ OK
1234 67 TmPB Flt
5555 xx 5 ++ OK
WWW.DIYALARMFORUM.COM
GSM Status Display Screen 1
PriRSSI – Primary Site RSSI level in dbm
GPRS – GPRS Service availability where "x" can be:
"Y" if GPRS is available
"N" if GPRS is Not available
REG – Registration status from radio module where
"x" can be:
N – Not Registered
H – Registered Home
S – Searching
D – Registration Denied
R – Registered Roaming
? – Unknown Registration State
Press the [space] key to go to the next screen.
Press the [backspace] key to go to the last screen.
GSM Status Display Screen 2
Cntry – Country Code
Netw – Network Code
LAC – Local area code
Press the [space] key to get to the next screen.
Press the [backspace] key to go to the previous field.
GSM Status Display Screen 3
Cell – Base Station ID
BaseSt – Base Station Antenna Sector
Chan – Control Channel in use
Press the [space] key to go to the next screen.
Press the [backspace] key to go to the previous field.
GSM Status Display Screen 4
Secondary GSM Site RSSI level in dbm.
Press the [space] key to go to the GSM Status Display
Screen 1.
Press the [backspace] key to go to the previous field.
ECP Mode
Displays the zone and system fault status.
Press the [space] key to go to the next field.
Press the [backspace] key to go to the previous field.
4204 Emulation Mode
Displays the zone and system fault status.
Press the [space] key to go to the next field.
Press the [backspace] key to go to the previous field.