Showing Application Data In Flash Eprom; Restoring Application Data From Flash Eprom To Ram - Honeywell XI581AH User Manual

XI581/2 BUSWIDE OPERATOR INTERFACE
Access Level
Select System Data from Main Menu
Select Flash EPROM
Show Applications
Purpose To display controller application data stored in Flash EPROM.
You must have access level 3 to perform this task.
1. At the Main Menu, use the arrow keys to move to and highlight System Data.
Press Enter (↵) to complete the selection.
RESULT: The 'System Data' screen displays with controller name and software
System Data
2. Use the arrow keys to move to and highlight Flash EPROM and then press
Enter (↵) to complete the selection.
RESULT: The 'Flash EPROM' screen lists options for controlling Flash EPROM.
3. Use the arrow keys to move to and highlight Show Applications and then press
Enter (↵) to complete the selection.
RESULT: The display window lists application programs in Flash EPROM with
Please choose Fixed Application
APPL_1
APPL_2
APPL_3
APPL_4_NAME_ZU_LA 26.03.98 20:30 I
APPL_5
NOTE:
See section "Application Selection" (page 39).

Showing Application Data in Flash EPROM

version as well as three possible functions (depending on access
level).
System Info
HW-Interface Config.
Flash EPROM
Buswide Access
Save application is highlighted by default.
Flash EPROM
Save Application
Erase Flash EPROM
Show Applications
their burn date and time.
23.05.95 10:43
17.03.96 17:02 I
11.11.97 23:00 1
08.08.98 14.26 M
The Flash EPROM can save more than one controller application
program. If two or more application programs have the same name,
the most recently saved application program appears at the bottom of
the list of application programs.

Restoring Application Data from Flash EPROM to RAM

65
ALPHABETIC REFERENCE
L L L L
EN2B-0126 (74-3554-8)