Selecting Points By Point Type - Honeywell XI581AH User Manual

XI581/2 BUSWIDE OPERATOR INTERFACE
Access Level
Select Point from Main Menu
Modify Point Description
c. Press the plus or minus keys to toggle or increment/decrement attribute.
d. Press Enter (↵) to complete the entry.
6. When done modifying the point description, press Cancel (C) to return to the
point user address list. When you are finished, repeatedly press Cancel (C) to
return to the Main Menu.
Purpose To find and display points that belong to a specific point type and modify their
attributes.
All users can display point information. You must have access level 3 to modify
point attributes.
1. At the Main Menu, use the arrow keys to move to and highlight Data Points.
Press Enter (↵) to complete the selection.
RESULT: The 'Data Points' screen appears. User Address is highlighted by
Data Points
User Address
Manual Operation
Accumul. Runtime
Type Selection
Points in Trend
2. Use the arrow keys to move to and highlight Type Selection. Press Enter (↵) to
complete the selection.
RESULT: The 'Types' screen appears with a list of defined point types.
Analog Input
Analog Output
Digital Input
Digital Output
Totalizer
Pseudo Totalizer
3. Use the arrow keys to move to and highlight the desired type. Press Enter (↵) to
complete the selection.
RESULT: The display window lists points you can view. The list contains only
4. Use the arrow keys to move to and highlight the desired point. Press Enter (↵) to
complete the selection.
NOTE:
RESULT: The display window shows the description of the point you selected.
5. Use the following steps to modify an attribute for the selected point:
a. Use the arrow keys to move to and highlight the field.
b. Press Enter (↵) to select the field.
The field begins blinking and is no longer highlighted.
c. Press the plus or minus keys to toggle or increment/decrement attribute.
default.
Suppress Alarm
Add Template
Delete Template
Modify Template
Template Search
Pseudo Analog
Pseudo Digital
Global Analog
Global Digital
Flexible Point
All
user addresses of points that match the selected type.
All user addresses for points may not be able to appear in the display
window at the same time.
The information that appears in a point description varies depending
on the type of point you selected (digital, analog, or totalizer). The
table in the beginning of this "Data Point Description" section
describes the various attributes.
55
ALPHABETIC REFERENCE

Selecting Points by Point Type

EN2B-0126 (74-3554-8)