Honeywell XI581AH User Manual page 83

XI581/2 BUSWIDE OPERATOR INTERFACE
Access Level
Copy Daily Program Function
— Press the up and down arrow keys to move to and highlight a field and press
Enter (↵). The first digit you can input begins to blink.
— Press the plus and minus keys to increment and decrement the value of the
digit.
— Press the right arrow key to move to the next digit within the field.
— Repeat this input procedure until the entire field is correct. Then press Enter
(↵) to complete the field entry. The cursor highlights the field you just
modified.
5. To add more switch points, highlight New and press Enter (↵) to display the list
of user addresses. You can select the same one to define another switch point
for it. When the desired one is on the screen, set its values as in Step 4.
To define a name for the new daily program (other than the non-descriptive
name the controller assigned), you must use the XI584 Operator and Service
Software.
RESULT: The new switch point becomes part of the new daily program for the
6. Press Cancel (C) to return to the list of time programs. When you are finished,
repeatedly press Cancel (C) to return to the Main Menu.
Purpose To copy a daily program in order to create a new daily program.
You must have access level 2 or 3 to perform this task.
Procedure 1. Display the 'Daily Program' screen that lists daily program functions ('Modify',
'New', 'Delete', and 'Copy'), if the menu is not already on display.
Summary of steps:
a. At the Main Menu, use the arrow keys to move to and highlight Time
Programme. Press Enter (↵) to complete the selection.
b. Use the arrow keys to move to and highlight the time program having the
desired daily program. Then press Enter (↵) to complete the selection.
c. Use the arrow keys to move to and highlight Daily Programme and then
press Enter (↵) to complete the selection.
Time Programme:
Modify
New
2. Use the arrow keys to move to and highlight Copy and then press Enter (↵) to
complete the selection.
RESULT: The window lists the daily programs you can copy.
DDC program DOES NOT use this point for optimization, you
cannot select this value.
selected point.
RESULT: The 'Time Programme' screen lists available time programs.
RESULT: The top line of the window displays the selected time
program. The remaining lines display the types of time
programs ('Today', 'Daily Programme', etc.).
RESULT: The top line of the display window shows the selected time
program. The remaining lines list daily program functions
(Modify, New, Delete, and Copy).
Time Program 1
Delete
Copy
79
ALPHABETIC REFERENCE
Copying Daily Programs
EN2B-0126 (74-3554-8)