Totalizers - Honeywell XI581AH User Manual

ALPHABETIC REFERENCE
Delete the Special Day Assignment
Select Status Option

Totalizers

Access Level
Select Totalizers from the Main Menu
EN2B-0126 (74-3554-8)
RESULT: The display window chronologically lists all special days and the
Special Days: Time Program 1
New Year's Day
Epiphany
Shrove Tuesday
Ash Wednesday
Good Friday
NOTE:
5. Use the arrow keys to move to and highlight the special day or holiday whose
assignment you want to delete. Then press Enter (↵) to complete the selection.
RESULT: The controller deletes the special day assignment, and the window
6. When you are finished, repeatedly press Cancel (C) to return to the Main Menu.
Continued from the special days procedure.
Special Days: Time Program 1
Status
4. Use the arrow keys to move to and highlight the status value (On in this
example) and press Enter (↵) to complete the selection.
RESULT: The Status field blinks.
5. Press the plus or minus key to change the entry in the 'Status' field from 'On' to
'Off' or vice versa. Then press Enter (↵) to complete the selection.
RESULT: The controller changes the status of the special days feature.
6. When you are finished, repeatedly press Cancel (C) to return to the Main Menu.
Purpose To reset the totalizers, display totalizer point value since last reset, and set the
service interval.
Totalizers keep track of when particular points need to be serviced. They count the
number of hours a point has run or the number of energy units it has produced
since it was last serviced. You should reset a data point's totalizer each time the
data point is serviced to ensure that the totalizer keeps an accurate record.
You must have Access Level 3 to perform this task.
1. From the Main Menu, use the arrow keys to move to and highlight Totalizers.
Press Enter (↵) to complete the selection.
RESULT: The display window lists two options for viewing totalizer information.
XI581/2 BUSWIDE OPERATOR INTERFACE
assigned daily programs (if assigned). If a special day does not have
a daily program assignment, that day uses the daily program
specified in the weekly program.
Vacation
Workday
Workday
Halfday
All special days or holidays may not be able to appear in the display
window at the same time. To view special days that do not display,
press the right arrow key to display the next page.
redisplays the special days list.
Change Status (Enable/Disable) Special Days Function
: On
Modify Delete
94
L L L L
I
1
I
M