Cisco ASA 5505 Getting Started Manual page 66

Configuring the Security Appliance for a DMZ Deployment
b.
c.
d.
The displayed configuration should be similar to the following. Verify that the
Step 6
information you entered is accurate.
Cisco ASA 5505 Getting Started Guide
6-16
In the Source Port area, confirm that the Service radio button is set to "="
(equal to), and then choose Any from the next drop-down list.
In the Destination Port area, confirm that the Service radio button is set to "="
(equal to), and then choose HTTP/WWW from the next drop-down list.
At this point, the entries in the Add Access Rule dialog box should be similar
to the following:
Click OK to return to the Security Policy > Access Rules pane.
Chapter 6 Scenario: DMZ Configuration
78-17612-02