Chapter 5
Configuring the Adaptive Security Appliance
Note
What to Do Next
78-17612-02
Based on your network security policy, you should also consider configuring the
adaptive security appliance to deny all ICMP traffic through the outside interface
or any other interface that is necessary. You can configure this access control
policy using ASDM.
From the ASDM main window, click Configuration > Properties > Device
Administration > ICMP Rules. Add an entry for the outside interface. Set the IP
address to 0.0.0.0, the netmask to 0.0.0.0, and the Action to deny.
Configure the adaptive security appliance for your deployment using one or more
of the following chapters:
To Do This...
Configure the adaptive security
appliance to protect a DMZ web server
Configure the adaptive security
appliance for remote-access VPN
Configure the adaptive security
appliance for site-to-site VPN
Configure the adaptive security
appliance as an Easy VPN remote device
See...
Chapter 6, "Scenario: DMZ
Configuration"
Chapter 7, "Scenario: IPSec
Remote-Access VPN Configuration"
Chapter 8, "Scenario: Site-to-Site
VPN Configuration"
Chapter 9, "Scenario: Easy VPN
Hardware Client Configuration"
Cisco ASA 5505 Getting Started Guide
What to Do Next
5-7