Chapter 4
Installing the ASA 5505
Installing a Cable Lock
Step 1
Step 2
Ports and LEDs
Front Panel Components
78-17612-02
The Cisco ASA 5505 includes a slot that accepts standard desktop cable locks to
provide physical security for small portable equipment, such as a laptop computer.
The cable lock is not included.
To install a cable lock, perform the following steps:
Follow the directions from the manufacturer for attaching the other end of the
cable for securing the adaptive security appliance.
Attach the cable lock to the lock slot on the back panel of the Cisco ASA 5505.
This section describes the front and rear panels of the ASA 5505. This section
includes the following topics:
Front Panel Components, page 4-9
•
Rear Panel Components, page 4-12
•
The LINK/ACT indicators on the front panel of the Cisco ASA 5505 are normally
solid green when a link is established and flashing green when there is network
activity. Each Ethernet interface (numbered 0 through 7) has two LEDs: one to
indicate the operating speed and the other to indicate whether the physical link is
established.
Cisco ASA 5505 Getting Started Guide
Ports and LEDs
4-9