Cisco ASA 5505 Getting Started Manual page 109

Chapter 9 Scenario: Easy VPN Hardware Client Configuration
Check the Enable Easy VPN Remote check box.
Step 4
To specify which mode the Easy VPN remote hardware client should run in, click
Step 5
Client Mode or Network Extension Mode radio button.
Step 6 In the Group Settings area, specify the type of authentication the VPN devices
should use.
•
In the User Settings area, specify the User Name and User Password to be used by
Step 7
the ASA 5505 when establishing a VPN connection.
78-17612-02
To specify that the VPN devices should use a text password for
authentication, click the Group Password radio button and enter a Group
Name and Group Password.
Configuring the Easy VPN Hardware Client
Cisco ASA 5505 Getting Started Guide
9-7