Cleaning And Maintenance; After Each Use - Buffalo CD963 Instruction Manual

Cleaning and Maintenance

General
Clean the griddle regularly. A clean appliance looks better, will last longer and will perform better.
Carbonised grease on the surface or on the griddle plate will hinder the transfer of heat from the
cooking surface to the food. This will result in loss of cooking efficiency.
DO NOT use water on the griddle plate while this item is still hot as warping and cracking may occur.
Allow the griddle plate to cool down before cleaning.
NOTE:
• DO NOT use abrasive detergents, strong solvents or caustic detergents as they could corrode or
damage the griddle.
• In order to prevent the forming of rust on the griddle plate, ensure that any detergent or cleaning
material has been completely removed after each cleaning. The appliance should be switched on
briefly to ensure the griddle plate becomes dry. Oil or grease should be spread over the griddle
surface in order to form a thin protective greasy film.
To keep your griddle clean and operating at peak efficiency, follow the procedures shown below:-

After Each Use

1. Clean the griddle with a scraper tool to remove any food debris.
2. Always ensure that the scraper tool blades are changed regularly to ensure that the scraper tool
works efficiently and prevents damage to the griddle plate surface.
CAUTION:
Always turn off the gas supply before cleaning.
This appliance is not water proof.
Do not use water jet spray to clean this appliance.
10