How To Add A User; How To Add An Existing User To A Second Keypad; How To Delete A User - Honeywell Tuxedo Touch Series Installation And Setup Manual

How to Add a User

Add a user, from the "Home" screen, do the following:
ICON
1. Press the Setup icon.
2. Press the System Setup icon.
3. Press the USER SETUP icon.
4. Press the ADD USER icon and
enter your Authorized Code.
5. Press the box next to Enter User
Name.
6. Type in the user name (6 characters
max.; no spaces between characters)
and press the OK icon.
7. Press the box next to User Number
and enter an available (3-digit) user
number; press the OK icon.
8. Press the box next to Enter User
Code, enter the 4-digit User Code for
this user and press the OK icon.
9. Press the box next to RF Button
Zone (if used); enter the 3-digit RF
Button Zone for this user.
10. Press the Save icon.

How to Add an Existing User to a Second Keypad

After adding a user to the first keypad, the same user can be added to a second keypad. From the
second keypad go to "User Setup" and enter the same user name and same user code (refer to "How to
Add a User" above). The second keypad will automatically update the user information. Press Save.

How to Delete a User

Delete a User as follows:
ICON
1. Select the User you want to delete.
2. Press the DELETE USER icon.
3. Enter your Authorized Code.
4. Press the appropriate icon.
How to Edit a User
Note: You cannot edit a User name or User number. To modify a User name or User number, you must
delete the User and re-enter the User. Edit a User as follows:
ICON
1. Press the EDIT USER icon.
2. Enter your Authorized Code.
3. Select the options needed for this
user and press Save.
User System Setup (cont'd)
ACTION
ACTION
ACTION
22
NOTES
• Use the Shift key for capital letters
• Use the BS (Backspace) key to make corrections.
• The @#$ key is not available for use at this time.
These characters cannot be saved to the control
panel.
Select the partitions, access level, and enter an
available user number for this user.
Available user numbers:
For Residential enter a number from 002-049.
For Commercial enter a number from 002-250.
If assigning this user to wireless key, enter one of the
zone numbers of the keyfob (the wireless key must be
programmed first before it can be assigned to a user).
NOTES
Three selections are available: add a user, edit a user,
or delete a user.
The Confirm Delete screen is displayed.
NOTES
Three selections are available: add a user, edit a user,
or delete a user.