How To Add A User; How To Add An Existing User To A Second Keypad; How To Delete A User - Honeywell Tuxedo Touch Series User Manual

SCAN SECURITY

How to Add a User

ICON
1. From the "Home" screen, press the
Setup icon.
2. Press the System Setup icon.
3. Press the USER SETUP icon.
4. Press the ADD USER icon and enter
your Authorized Code.
5. Press the box next to Enter User Name.
6. Type in the user name (6 characters
max.; no spaces between characters) and
press the OK icon.
7. Press the box next to User Number and
enter an "available" (3-digit) user number;
press the OK icon.
8. Press the box next to Enter User Code,
enter the 4-digit User Code for this user
and press the OK icon.
9. Press the box next to RF Button Zone
(if used); enter the 3-digit RF Button Zone
for this user.
10. Press the Save icon.

How to Add an Existing User to a Second Keypad

After adding a user to the first keypad, the same user can be added to a second keypad. From the second keypad go
to "User Setup" and enter the same user name and same user code (refer to "How to Add a User" above). The second
keypad will automatically update the user information. Press Save.

How to Delete a User

ICON
1. Select the User you want to delete.
2. Press the DELETE USER icon.
3. Enter your Authorized code.
4. Press the appropriate icon.
The Confirm Delete screen is displayed.
User Setup (cont'd)
ACTION
On the Data Entry screen, enter the user information.
• Use the Shift key for capital letters
• Use the BS (Backspace) key to make corrections.
• The @#$ key is not available for use at this time. These characters cannot
The authorized code for adding users is dependent upon the alarm panel you
are interfacing with. Check your alarm panel Installation and Setup Guide to
determine who can add users.
If assigning this user to wireless key, enter one of the zone numbers of the
keyfob (the wireless key must be programmed first before it can be assigned to
a user).
Select the partitions, access level, and enter an available user number for this
user.
Available user numbers:
For Residential enter a number from 002-049.
For Commercial enter a number from 002-250.
ACTION
Three selections are available: add a user, edit a user, or delete a user.
The authorized code for deleting, adding, and editing users is dependent upon
the alarm panel you are interfacing with. Check your alarm panel Installation
and Setup Guide to determine who can delete, add, and edit users.
NOTES
be saved to the control panel.
NOTES
29