Honeywell Tuxedo Touch Series Installation And Setup Manual page 38

Add a Trigger
In the "Trigger" box, press the Add icon.
Press the TIME button and Set the occurrence to Repeated, or Once. If "Repeated" was selected,
choose the desired days of the week; or Enter Date for an occurrence that happens Once.
Press the SECURITY button and select a security mode: DISARM, AWAY, STAY, NIGHT (for
residential panels only) .
Press the THERMOSTAT button to select the Thermostat Devices from the drop down menu. Use the
ABOVE and BELOW button to increase/decrease the temperature range or press the Temperature
Value box and enter 2 digits for the desired temperature. Note: Test thermostats first to ensure
proper function in the "Scene" feature.
Press the DOOR button to select a Door Device from the drop-down menu (see notes below). Select
LOCKED, UNLOCKED or CODE UNLOCKED. Press Save.
Add an Action
In the "Action" box, press the Add icon.
Set the SECURITY mode to: DISARM, AWAY, STAY, NIGHT. Enter User Code, if required.
Press the LIGHT button and select a Light Device from the drop down menu; set the action to ON or
OFF.
Press the THERMOSTAT button and select a Thermostat Device from the drop-down menu. Press the
Set Mode button to set the Action to "Off", "Heat", or "Cool". Press the Set Energy button and select
from "Normal" or "Saving" energy mode. Press the Set Point button and enter a set point value for
"Heat Point" and "Cool Point". Note: Test thermostats first to ensure proper function in the Scene
feature.
Press the DOOR button and select a Door Device from the drop-down menu (see notes below). Set the
action to LOCKS or UNLOCKS. Press Save.
Add a Condition
In the "Condition" box, press the Add icon.
Set the TIME: Set the occurrence to Repeated, or Once. Follow the screen instructions to select the
days of the week if "Repeated" was selected or "Enter Date" for an occurrence that happens Once.
Press the SECURITY button and select a security mode: DISARM, AWAY, STAY, NIGHT.
Press the THERMOSTAT button and select a Thermostat Device from the drop down menu. Use the
ABOVE and BELOW buttons to increase/decrease the temperature or press the Temperature Value
box and enter 2 digits for the desired temperature. Note: Test thermostats first to ensure proper
function in the Scene feature.
Press the DOOR button and select a Door Device from the drop-down menu (see notes below). Select
LOCKED or UNLOCKED. Press Save.
Notes:
1. Motorized door lock bolts physically lock and unlock the door when activated, but if the door lock
installed is a non-motorized type, activation allows the door to be manually unlocked without a
"Compatible Devices" section for further information.
2. Some thermostats do not update temperature status automatically (i.e., Wayne Dalton).
3. When using a Kwikset Smartcode Electronic Deadbolt door lock (in a Scene that is programmed to
trigger when unlocked) the Scene does not trigger if using a key; enter a user code.
Automation (cont'd)
34
key. See