Ggsn Engineering Rules - Cisco ASR 5000 Series Administration Manual

▀ GGSN Engineering Rules

GGSN Engineering Rules
The following engineering rules apply when the system is configured as a GGSN:
Gn/Gp interfaces can be configured. That is, if a system context is configured with a GGSN service, then all
interfaces in that context may be used.
Gi interfaces can be configured. That is, if a system context is configured as a destination context for an APN,
then all interfaces in that context may be used.
Ga interfaces. That is, if a system context is configured for GTPP accounting, then all interfaces in that context
may be used.
One GSN-MAP node may be configured per system context (in lieu of Gc).
Up to 1000 network requested PDP contexts may be configured.
Up to 8 GTPP groups (excluding the default GTPP group) can be configured per chassis.
Up to 4 GTPP Storage Servers can be configured per GTPP group.
Up to 32 GTPP Storage Servers can be configured per system context.
Up to 511 GRE tunnel interface can be configured per context.
▄ Cisco ASR 5000 Series Gateway GPRS Support Node Administration Guide
Engineering Rules
OL-22944-02