Mobile IP Configuration Examples
Required
Description
Information
IP pool
An initial address and a subnet, or a starting address and an ending address, are required for each configured
addresses
pool. The pool will then consist of every possible address within the subnet, or all addresses from the starting
address to the ending address.
The pool can be configured as public, private, or static.
How This Configuration Works
The following figure and the text that follows describe how this configuration with a single source and destination
context would be used by the system to process a Mobile IP data call.
OL-22944-02
Example 2: Mobile IP Support Using the System as an HA ▀
Cisco ASR 5000 Series Gateway GPRS Support Node Administration Guide ▄