Using The Dhcp Test Command; Testing Gtpp Accounting With A Cgf - Cisco ASR 5000 Series Administration Manual

Troubleshooting the Service

Using the DHCP Test Command

This command tests the system‟s ability to communicate with a Dynamic Host Control Protocol (DHCP) server. Testing
is performed on a per-DHCP service basis for either a specific server or all servers the DHCP service is configured to
communicate with. This functionality is useful for troubleshooting and/or monitoring.
Once executed, the test attempts to obtain an IP address from the DHCP server(s) and immediately release it.
Important:
configured.
The command has the following syntax:
Keyword/Variable
The following figure displays a sample of this command‟s output showing a successful DHCP test for a DHCP service
called DHCP-Gi to a server with an IP address of 192.168.16.2. The IP address provided during the test was
192.168.16.144.

Testing GTPP Accounting with a CGF

When used to test a CGF, this tool causes the system to send GTPP echo packets to the specified CGF(s).
Important:
OL-22944-02
This command must be executed from within the context in which at least one GGSN service is
Description
The name of the DHCP service.
length and is case sensitive.
Tests DHCP functionality for all servers.
Tests DHCP functionality for the server.
This tool must be executed from the context in which GTPP functionality is configured.
can be from 1 to 63 alpha and/or numeric characters in
Cisco ASR 5000 Series Gateway GPRS Support Node Administration Guide ▄
Test Commands ▀