Check Button - Honda 08E91-E54-100 Installation Insructions

8. The following message will display: Obtain PCM-
code (IMMOBILIZER PCM CODE) from iN. The
vehicle's VIN will be required to obtain a
password. (USA) Click the check button.
"Obtain PCM-code"
message.
9. Input the PCM code, then click the check button.
NOTE: To ensure security, the PCM code
(password) is changed every day, so it is impossible
to register the remote control engine starter if the
dates of the PCM code acquisition and registration
are different. The date on the HDS/MVCI tester
should also be the same.
Input the PCM-Code.
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
10. The following message will display: The

CHECK BUTTON

QB32106AH
11. The following message will display: Check that
12. Perform the Check the operation of the Remote
CHECK BUTTON
QB32107BH
AII 50024-50373 (1308)
registration of the Remote Control Engine Starter
Unit has been completed. Turn the ignition off.
engine can be started by the Transmitter. Click
the check button.
"Check that engine can be
started by the Transmitter."
Control Engine Starter, then disconnect the HDS/
MVCI.
"The registration of the
Remote Control Engine
Starter Unit has been
completed."
QB32108CH
CHECK BUTTON
QB32109CH
23 of 25