Using Your Ip Phone; Adjusting Volume And Muting - Cisco SPA 504G Quick Start Manual

QUICK START GUIDE
Cisco SPA 504G
Phone Feature Description
lcr Returns the last missed call by dialing the number that called you.
missed calls Shows the Missed Calls list.
more Displays other softkey buttons that are available.
record Records the call in progress.
redial Displays a list of recently dialed numbers.
resume Resumes a call that is on hold.
save Saves your changes.
select Selects the highlighted item on the LCD screen.
xfer Performs a call transfer.
xfer2vm Transfers an active call to voice mail.
y/n Enters a submenu and when pressed, toggles between Yes or No to enable or disable an option.
4

Using Your IP Phone

To place or answer a call, you can pick up the handset, press the Speaker or Headset button, or press a line button.
Putting a Call on Hold
To put a call on hold, press the Hold button. The caller hears a series of three rapid beeps or music while on hold.
To resume the call, press the flashing red line button for the call or the Resume softkey.
Ending a Call
If you are using the handset, hang up or press the endCall softkey. If you are using the speakerphone, press the Speaker button. If you are
using the headset, press the Headset button.

Adjusting Volume and Muting

To adjust the volume of the handset or speaker, lift the handset or press the Speaker button. Press + on the Volume button to increase the
volume, or press - to decrease the volume. Press Save.
To adjust the ringer volume, press the Volume button when the handset is on the phone and the Speaker button is off. Press the Save
softkey.
To mute the phone microphone, speaker, or headset microphone, press the Mute button on the phone. The button glows red. Press the Mute
button again to unmute.
4