Instructions For Connecting The Phone Adapter; Figure 3-2: Connect The Ethernet Network Cable; Figure 3-3: Connect The Power Cable; Figure 3-4: Connect The Telephone Cable - Linksys PAP2T User Manual

Internet Phone Adapter with 2 Ports for Voice-over-IP

Instructions for Connecting the Phone Adapter

If you already have an account set up with your Internet phone service provider, proceed to step 1.
If you do not have an account, go to your Internet phone service provider's website and sign up for service. When
you have finished setting up and account, proceed to step 1.
1 Connect the included Ethernet network cable to the ETHERNET port of the Phone Adapter, then connect the
other end to any available Ethernet port on your router or gateway.
2. Connect the included power adapter to the POWER port on the back of the Phone Adapter, then plug the
other end into a standard electrical outlet.
3. Using a telephone cable, connect your telephone to the PHONE 1 port on the back of the Phone Adapter.
4. If you have a second Internet phone service account, connect another telephone or a fax machine to the
PHONE 2 port of the Phone Adapter.
The Power, Ethernet, and Phone LEDs will be solidly lit when the Phone Adapter is ready for use. To make and
receive calls, follow the instructions provided by your Internet phone service provider.
If you need to manually configure the Phone Adapter's network settings, you can use the telephone; for
instructions, proceed to "Chapter 4: Using the Phone Adapter's Interactive Voice Response Menu."
The installation of the Phone Adapter is complete. Now you can pick up your phone and make calls.
Proceed to the next section, "Placement Options," if you want to attach the Phone Adapter's base.
6
Figure 3-2: Connect the Ethernet
Network Cable

Figure 3-3: Connect the Power Cable

Figure 3-4: Connect the
Telephone Cable
Chapter 3: Connecting the Phone Adapter
Instructions for Connecting the Phone Adapter