Chapter 2: Getting To Know The Phone Adapter; Back Panel Ports; Figure 2-1: Back Panel - Linksys PAP2-VU Installation And Troubleshooting Manual

Phone adapter with 2 ports for voice-over-ip
Table of Contents

Advertisement

Chapter 2: Getting to Know the Phone Adapter

Back Panel Ports

The Phone Adapter's ports are located on the back panel.

Figure 2-1: Back Panel

PHONE 1 Port
For your primary Internet phone line, the PHONE 1 port allows you to connect your
telephone to the Phone Adapter using the included telephone jack adapter (if necessary).
PHONE 2 Port
If you add a second Internet phone service provider line, then use the PHONE 2 port. It
allows you to connect a second telephone (or fax machine) to the Phone Adapter using the
included telephone jack adapter (if necessary).
ETHERNET Port
The ETHERNET port allows you to connect the Phone Adapter to your router or gateway
using a Category 5 (or better) Ethernet network cable.
POWER Port
The POWER port is where you will connect the included power adapter.
Chapter 2: Getting to Know the Phone Adapter
Back Panel Ports
Phone Adapter with 2 Ports for Voice-over-IP
NOTE: These Phone ports do
not carry any voltage.
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pap2

Table of Contents