Linksys PAP2T User Manual page 16

Internet Phone Adapter with 2 Ports for Voice-over-IP
Action
Set Network Mask (or Subnet
Mask)
Check Static Gateway IP Address
Set Static Gateway IP Address
Check MAC Address
Check Firmware Version
12
Interactive Voice Response Menu
Command (press these Choices
keys on the telephone)
121 Enter the network mask using
numbers on your telephone
keypad. Use the
* (star) key to enter a decimal
point.
130 —
131 Enter the IP address using
numbers on your telephone
keypad. Use the
* (star) key to enter a decimal
point.
140 —
150 —
Description
To set the network mask, the DHCP feature must
be disabled. If the DHCP feature is enabled, you
will hear, "Invalid Option," if you try to set the
network mask.
Use this command to check the current gateway IP
address of the Phone Adapter.
To set a static gateway IP address, the DHCP
feature must be disabled. If the DHCP feature is
enabled, you will hear, "Invalid Option," if you try to
set a static gateway IP address.
Use this command to check the current MAC
address of the Phone Adapter in hexadecimal
string format.
Use this command to check the current version
number of the firmware currently installed on the
Phone Adapter.
Chapter 4: Using the Phone Adapter's Interactive Voice Response Menu
Using the Interactive Voice Response Menu