Advertisement
-
straight cuts when chamfering or grooving.
Attach the guide base to the side base with
the wing nuts and bolts.
Guide base
The wide base
is
effectively used for
Adjust the distance between the bit and
the side (A) of guide base by sliding the
guide base. Then tighten the wing nuts
securely. The max. distance is 25 mm
( I " ) .
When chamfering, grasp the tool body with
one hand and press the guide base down
slightly with the other hand as shown in
the figure. The bit should point up so that
you can see it easily. The chamfering angle
may be adjusted by tilting the side base.
The chamfering width may be adjusted by
sliding the guide base.
12
Advertisement
