Wps - Draytek VigorAP 800 User Manual

3 . 8 . 4 W P S
3 . 8 . 4 W P S
Open Wireless LAN>>WPS to configure the corresponding settings.
Enable WPS
WPS Configured
WPS SSID
WPS Auth Mode
WPS Encryp Type
AP PIN
Configure via Push
Button
Configure via Client
PinCode
VigorAP 800 User's Guide
Check this box to enable WPS setting.
Display related system information for WPS. If the wireless
security (encryption) function of VigorAP 800 is properly
configured, you can see 'Yes' message here.
Display current selected SSID.
Display current authentication mode of VigorAP 800. Only
WPA2/PSK and WPA/PSK support WPS.
Display encryption mode (None, WEP, TKIP, AES, etc.) of
VigorAP 800.
The number displayed here is used for remote client entering the
registrar's PIN code in remote station to make a network
connection.
Click Start PBC to invoke Push-Button style WPS setup
procedure. VigorAP 800 will wait for WPS requests from
wireless clients about two minutes. The WPS LED on t
VigorAP 800 will blink fast when WPS is in progress. It will
return to normal condition after two minutes. (You need to setup
WPS within two minutes)
Type the PIN code specified in wireless client you wish to
connect, and click Start PIN button. The WLAN LED on
VigorAP 800 will blink fast when WPS is in progress. It will
return to normal condition after two minutes. (You need to setup
WPS within two minutes).
74