Download
Share
Print this page
Draytek VigorAP 902 Quick Start Manual
  1. Manuals
  2. Brands
  3. Draytek Manuals
  4. Wireless Access Point
  5. VIGORAP 902
  6. Quick start manual

Draytek VigorAP 902 Quick Start Manual

802.11ac
Hide thumbs Also See for VigorAP 902:

Advertisement

Quick Links

Download this manual See also: User Manual

Advertisement

loading

Related Manuals for Draytek VigorAP 902

Summary of Contents for Draytek VigorAP 902

  • Page 2: Quick Start Guide

    No. 26, Fu Shing Road, HuKou Township, HsinChu Industrial Park, Hsin-Chu, Taiwan 303 Product: VigorAP 902 DrayTek Corp. declares that VigorAP 902 is in compliance with the following essential requirements and other relevant provisions of R&TTE Directive 1999/5/EEC ErP 2009/125/EC and RoHS 2011/65/EU.

  • Page 3: Package Content

    Package Content Take a look at the package content. If there is anything missed or damaged, please contact DrayTek or dealer immediately. Access Point Antenna Quick Start Guide RJ-45 Cable (Ethernet) The type of the power adapter depends on the country that the AP will be...

  • Page 4: Descriptions Of Components

    Descriptions of Components Status Explanation The system is not ready or is failed. Blinking The system is ready and can work normally. A USB device is connected and active. Blinking The data is transmitting. 2.4G Wireless function is ready. Wireless function is not ready. Blinking Data is transmitting (sending/receiving).
  • Page 5 Interface Description Power switch. PWR: Connecter for a power adapter. LAN B Connecter for xDSL / Cable modem (Giga level) or router. LAN A4, Connecter for xDSL / Cable modem (Giga level) / A2, A1 computer or router. A3 (PoE) LAN A3 is used for PoE connection (for indoor use).

  • Page 6: Installation

    VigorAP 902 User’s Guide. 2. Connect a computer to other available LAN A port. Make sure the subnet IP address of the PC is the same as VigorAP 902 management IP, e.g., 192.168.1.X. 3. Connect the A/C power adapter to the wall socket, and then connect it to the PWR connector of the access point.
  • Page 7 Configuring Web Pages 1. Make sure your PC connects to the router correctly. 2. Open a web browser on your PC and type http://192.168.1.2. A pop-up window will open to ask for username and password. Pease type “admin/admin” on Username/Password and click Login. 3.
  • Page 8 4. The first page is set for 2.4G wireless connection. There are five operation modes for you to choose. Simply click any one of modes. In this example, choose AP and click Next. 5. For the SSID configuration, choose the mode you want and type related information for client authentication.
  • Page 9 6. Next, the following page is set for 5G wireless connection. There are three wireless modes for you to choose. The default is Mixed(11a+11n+11ac). Change the information listed in this page according to the data offered by your ISP. Then click Next. 7.
  • Page 10 Default Pre-Shared Key (PSK) with 13 ASCII characters is provided and stated on the label pasted on the bottom of VigorAP. For the communication, all wireless devices must support the Note same encryption bit length and share the same key. If WEP mode is selected, only one of four preset keys can be selected at one time.
  • Page 11 Contacting DrayTek If the router still cannot work correctly after trying many efforts, please contact your dealer for further help right away. For any questions, please feel free to send e-mail to support@draytek.com.  Read the installation guide thoroughly before you set up the access point.