88 | Performance Series HREP2 DVR User Guide
3.
4.
Storage Settings
You can configure the settings of and view information of the disk and external storage device.
Disk Information
This screen will show information about the connected disk.
1.
2.
www.honeywell.com/security
Figure 4-40
Control Device Settings
•
SYSTEM ID: Set the ID of the DVR so that the keyboard controller can identify.
•
PROTOCOL: Set up the protocol of the keyboard controller.
•
BAUD RATE: Specify the RS485 communication speed.
•
REMOTE CONTROLLER ID: Set the ID of the remote control.
To apply the change, click APPLY at the bottom of the screen.
When finished, press the EXIT button on the remote control or click CLOSE in the lower
part of the screen. The confirmation message appears and you will return to the previous
menu.
From SYSTEM SETUP
Use the
, and ENTER buttons on the remote control or use the mouse to
,
,
,
select either INTERNAL (see
Please check the status for each connected device.
STORAGE, select DISK INFORMATION.
Figure
4-41) or EXTERNAL STORAGE (see
Figure
4-42).