3.
4.
System Management Settings
You can check, update or reset the system information.
1.
Figure 4-32
Date/Time Manual Setting
Note
Both TIME SERVER and TIME SYNC will be enabled only if the DVR is
connected to the Internet.
To apply the change, click APPLY at the bottom of the screen.
When finished, press the EXIT button on the remote control or click CLOSE in the lower
part of the screen. The confirmation message appears and you will return to the previous
menu.
From SYSTEM SETUP
SYSTEM, select SYSTEM MANAGEMENT (see
System Setup | 83
Figure
4-33).
800-15802 - A - 12/2013