66 | Performance Series HREP2 DVR User Guide
2.
3.
4.
Sequence Settings
Select a split mode for the sequence, and also select a list of active items when the sequence
is performed.
1.
2.
www.honeywell.com/security
Figure 4-12
Monitor Options Screen
Use the
, and ENTER buttons on the remote control or mouse to set the dwell
,
,
,
for Sequence mode and SPOT Out dwell.
•
SEQUENCE DWELL: Sets the time interval to the next screen mode for Live
monitoring, which defines individual screen mode's dwell time in the Sequence. (Can
set to 1 sec ~ 60 sec).
•
SPOT DWELL: Sets the time interval to the next view type, which defines individual
view type's dwell time for SPOT OUT. (Can set to 1 sec ~ 60 sec).
To apply the change, click APPLY at the bottom of the screen.
When done, press EXIT on the remote control or click CLOSE at the bottom of the screen.
The confirmation message appears and you will return to the previous menu.
From SYSTEM SETUP
Use the
, and ENTER buttons on the remote control or mouse to add a
,
,
,
sequence or change the settings of the existing sequence.
•
ACTIVATION: Select a list that you want to activate the sequence for. Only one list will
become active.
•
ADD: Add a sequence.
DISPLAY, select SEQUENCE (see
Figure
4-13).