Table of Contents
Advertisement
Overview
This document introduces the HREP2 4-, 8-, and 16-Channel Digital Video recorders and covers
how to install and operate these DVRs.
This document is intended for system integrators, installers, and end-user operators.
Safety Instructions
The Company shall not have any responsibility for any accident or damage that may incur
during the use of the product. For your safety, we provide a few instructions about installation,
manipulation, cleaning, assembly/disassembly of the product as below. So please read
carefully and comply with the instructions.
Before Installation
Comply with the following instructions to prevent a fire, explosion, system
failure or electric shock.
•
•
•
•
In Operation Mode
Comply with the following instructions to prevent a fire, explosion, system
failure or electric shock.
•
•
•
•
•
•
Remove the power supply module before proceeding.
Check the input voltage (AC100V–AC240V) to the power supply module before
connecting it.
Keep the product away from humidity.
Ensure that all devices connected to the product are properly earth-grounded.
If you need to open the cover, consult with a service person who could help you do what
you want to do.
Do not connect multiple devices to a single power socket.
Keep the product away from dust or too much combustible substances (ex: propane gas).
Do not touch it with wet hand.
Do not insert a conductor in the vent of the ventilation system.
Do not apply excessive force to unplug the power cord.
1
1
800-15802 - A - 12/2013
Advertisement
Table of Contents
