160 | Performance Series HREP2 DVR User Guide
Tamper Event Settings
You can set how to react upon a detected tampering event (see
When finished, click APPLY to apply the changes.
System Event Settings
You can set which action to perform if an event related to the disk (see
(see
want to notify the user of the event using the alarm output, buzzer, OSD popup and email.
When finished, click APPLY to apply the changes.
www.honeywell.com/security
Figure 9-43
Web Viewer Tamper Event Settings
Note
For more information about how to set the Tamper Event, refer to
Settings on page
Figure
9-45), network (see
Figure 9-44
Web Viewer System Event Status - Disk
103.
Figure
9-47) or system (see
Figure
9-43).
Tamper Event
Figure
9-44), recording
Figure
9-46) happens. You may